LG V-net PQNUD1S00 Owner's Manual page 25

Installer Setting - Checking Address of Central Control
With the PLASMA button pressed, press the RESET button.
Press the ON/OFF button toward the indoor unit 1 time, and the indoor unit will display the set
address in the display window.
- The address display time and method can differ by the indoor unit type.
Reset the remote controller to use the general operation mode.
With the MODE button pressed, press the RESET button.
By using the TEMPERATURE SETTING button, set the indoor unit address.
- Setting range : 00 ~ FF
Group No.
Indoor Unit No.
After setting the address, press the ON/OFF button toward the
indoor unit 1 time.
The indoor unit will display the set address to complete the address setting.
- The address display time and method can differ by the indoor uint type.
Reset the remote controller to use the general operation mode.
How to set each Indoor Unit
Userʼs Manual 25