Installation instruction
4. After fixing the top part of the
remote controller to the installation
board as shown in beside picture,
press the bottom part to assemble
the controller to itʼs board.
When disassembling the remote
controller from the installation board, use
the driver as shown in the right picture
and insert it into the hole with the arrow.
And when you pull the driver in the front
direction, the remote controller will be
separated.
CAUTION
When installing Function Scheduler, do not bury it in the wall. (It can cause communication error.)
8 Function Scheduler
Wall
Side
Wall
Side
Wall
Side
Wall
Side