Toshiba TD-E653 Owner's Manual page 19

Press OK to open the Scheduler Settings menu screen. You can set up to 4 different
schedulers. Highlight the Status column of the desired scheduler option and set as
Enabled by using the Left/Right directional buttons after pressing the OK button.
Scheduler Using the scheduler options you can set the unit to turn on automatically at defined
time intervals with the defined input source setting. If the Source option is set as Last
Settings
Source, the input source will not be changed at the power-up." to "If the Source option
is set as Last Source, the input source will not be changed at the power-up. If CMS or
Open browser is selected in the Auto launch menu, then the selected function will start.
Press OK to open the Link Options menu screen. Current Start url and Settings url
links will be displayed. These items are for information only and not selectable and can
only be changed by USB operation command and RS232. See USB operation and
RS232 command list Open browser initial page and NTP server link preferences
Link options
can be configured using the remote control or RS232. The display clock function will
only operate if an NTP server is used. To ensure correct operation, please change the
NTP server to one that is more suitable for the location where the display is to be used.
Note: Start URL and Settings URL availability is depending on model.
Volume Settings Press OK to see available menu options.
Reset to Default Highlight this option and press the OK button on the remote to return the Display to
Values default settings.
Highlight and press OK to perform First Time Installation and reset all settings to factory
First time
settings. You will need to enter the correct PIN to carry out this operation.
installation
Note: Enter the PIN you have defined during the First Time Installation process.
If you have forgotten the pin used, please contact Toshiba service center.
English - 18 -