Related Manuals for Showgear PSA-32A12M
Summary of Contents for Showgear PSA-32A12M
- Page 1 USER MANUAL ENGLISH PSA-32A12M Product code: 50665 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 PSA-32A12M Preface Thank you for purchasing this Showgear product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
PSA-32A12M Table of contents Introduction ................................3 Before Using the Product ..........................3 Intended Use ............................... 3 Text Conventions ..............................3 Symbols and Signal Words ..........................4 Symbols on the Information Label ........................4 Safety ..................................5 Warnings and Safety Instructions ........................5 Requirements for the User .......................... -
Page 4: Introduction
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: Showgear PSA-32A12M with power cable (1,5 m) User manual Fig. 01 Intended Use This device is intended for professional use as a 3-phase power distribution unit in theaters, entertainment facilities, public venues, and similar. -
Page 5: Symbols And Signal Words
PSA-32A12M Symbols and Signal Words Safety notes and warnings are indicated throughout the user manual by safety signs. Always follow the instructions provided in this user manual. Indicates an imminently hazardous situation which, if not avoided, will result in DANGER death or serious injury. -
Page 6: Safety
PSA-32A12M Safety Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. Warnings and Safety Instructions... - Page 7 PSA-32A12M Attention General safety ● Do not shake the device. Avoid brute force when installing or operating the device. ● If the device is dropped or struck, disconnect the device from the electrical power supply immediately. If the device is exposed to extreme temperature variations (e.g. after transportation), do not switch it on immediately.
-
Page 8: Requirements For The User
PSA-32A12M Requirements for the User DANGER This product may not be used by ordinary persons. This product may be used only by instructed or skilled persons. Installation and maintenance can be carried out by instructed or skilled persons. Service shall be carried out only by skilled persons. Contact your Highlite International dealer for more information. -
Page 9: Description Of The Device
PSA-32A12M Description of the Device The PSA-32A12M is a 3-phase power distribution unit, providing real-time voltage and amperage information during your show. It has 7 Schuko outputs, 2 HAN16 connector outputs (divided over 3 phases) and a 5-pin CEE input. The maximum allowed current load is 32 A per phase. The maximum allowed current load per output is 16 A (Schuko) and 6 x 10 A (HAN16). -
Page 10: Product Specifications
PSA-32A12M Product Specifications Model: PSA-32A12M Electrical: Rated current: 32 A MCB rated current: 16 A MCB class: Class C MCB poles: RCCB class: RCCB sensitivity: 30 mA RCCB poles: Conductors: Inputs/Outputs: Power connector IN: 1,5 m H07RN-F 5G6 cable + CEE male 3P+N+PE, 400 V AC, 50/60 Hz... -
Page 11: Installation
PSA-32A12M Installation Safety Instructions for Installation WARNING Incorrect installation can cause serious injuries and damage of property. Installation must be carried out only by instructed or skilled persons. Follow all applicable European, national and local safety regulations concerning electrical installations. -
Page 12: Schematic Overview
PSA-32A12M Schematic Overview Fig. 05 HAN16 Connector You can connect external devices to the HAN16 connectors (13/14). The connectors have the following pinout: Fig. 06 Product code: 50665... -
Page 13: Setup And Operation
PSA-32A12M Setup and Operation Warnings and Precautions Attention Connect all cables before supplying power. Disconnect power supply before connecting or disconnecting cables. Safety Instructions for Operation Attention This device must be used only for the purposes it is designed for. -
Page 14: Troubleshooting
PSA-32A12M Troubleshooting This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. The device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage. -
Page 15: Basic Cleaning Instructions
PSA-32A12M Basic Cleaning Instructions To clean the device, follow the steps below: Disconnect the device from the electrical power supply. Allow the device to cool down for 5 minutes. 03) Clean the device with a soft, lint-free cloth. Attention ●... - Page 16 ©2021 Showgear...
Need help?
Do you have a question about the PSA-32A12M and is the answer not in the manual?
Questions and answers