Subscribe to Our Youtube Channel
Related Manuals for Showgear PSA-16A3S
Summary of Contents for Showgear PSA-16A3S
- Page 1 USER MANUAL ENGLISH PSA-16A3S Product code: 50661 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 PSA-16A3S Preface Thank you for purchasing this Showgear product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
PSA-16A3S Table of contents Introduction ................................3 Before Using the Product ..........................3 Intended Use ............................... 3 Text Conventions ..............................3 Symbols and Signal Words ..........................4 Symbols on the Information Label ........................4 Safety ..................................5 Warnings and Safety Instructions ........................5 Requirements for the User .......................... -
Page 4: Introduction
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: Showgear PSA-16A3S User manual Fig. 01 Intended Use This device is intended for professional use as a 3-phase power distribution unit in theaters, entertainment facilities, public venues, and similar. -
Page 5: Symbols And Signal Words
PSA-16A3S Symbols and Signal Words Safety notes and warnings are indicated throughout the user manual by safety signs. Always follow the instructions provided in this user manual. Indicates an imminently hazardous situation which, if not avoided, will result in DANGER death or serious injury. -
Page 6: Safety
PSA-16A3S Safety Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. Warnings and Safety Instructions... - Page 7 PSA-16A3S Attention General safety ● Do not shake the device. Avoid brute force when installing or operating the device. ● If the device is dropped or struck, disconnect the device from the electrical power supply immediately. If the device is exposed to extreme temperature variations (e.g. after transportation), do not switch it on immediately.
-
Page 8: Requirements For The User
PSA-16A3S Requirements for the User DANGER This product may not be used by ordinary persons. This product may be used only by instructed or skilled persons. Installation and maintenance can be carried out by instructed or skilled persons. Service shall be carried out only by skilled persons. Contact your Highlite International dealer for more information. -
Page 9: Description Of The Device
PSA-16A3S Description of the Device The PSA-16A3S is a 3-phase power distribution unit, providing real-time voltage and amperage information during your show. It has 7 Schuko outputs (divided over 3 phases) and a 5-pin CEE input. The maximum allowed current load is 16 A per phase. The maximum allowed current load per output is 16 A. -
Page 10: Product Specifications
PSA-16A3S Product Specifications Model: PSA-16A3S Electrical: Rated current: 16 A MCB rated current: 16 A MCB class: Class C MCB poles: Conductors: Breaking capacity: Inputs/Outputs: Power connector IN: 1 x CEE male 3P+N+PE, 400 V AC, 50/60 Hz Power connector OUT:... -
Page 11: Installation
PSA-16A3S Installation Safety Instructions for Installation WARNING Incorrect installation can cause serious injuries and damage of property. Installation must be carried out only by instructed or skilled persons. Follow all applicable European, national and local safety regulations concerning electrical installations. -
Page 12: Connecting To Power Supply
PSA-16A3S Connecting to Power Supply DANGER Electric shock caused by short-circuit The device accepts AC mains power at 400 V and 50/60 Hz. Do not supply power at any other voltage or frequency to the device. This device falls under IEC protection class I. Make sure that the device is always electrically connected to the ground (earth). -
Page 13: Setup And Operation
PSA-16A3S Setup and Operation Warnings and Precautions Attention Connect all cables before supplying power. Disconnect power supply before connecting or disconnecting cables. Safety Instructions for Operation Attention This device must be used only for the purposes it is designed for. -
Page 14: Troubleshooting
PSA-16A3S Troubleshooting This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. The device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage. -
Page 15: Corrective Maintenance
PSA-16A3S Attention ● Do not immerse the device in liquid. ● Do not use alcohol or solvents. Corrective Maintenance The device does not contain user-serviceable parts. Do not open the device and do not modify the device. Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for more information. - Page 16 ©2021 Showgear...
Need help?
Do you have a question about the PSA-16A3S and is the answer not in the manual?
Questions and answers