Related Manuals for Showgear PowerBOX 4PG
Summary of Contents for Showgear PowerBOX 4PG
- Page 1 USER MANUAL ENGLISH PowerBOX 4PG Product code: 90662 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 PowerBOX 4PG Preface Thank you for purchasing this Showgear product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
PowerBOX 4PG Table of contents Introduction ................................3 Before Using the Product ..........................3 Intended Use ............................... 3 Product Lifespan ..............................3 Text Conventions ..............................3 Symbols and Signal Words ..........................4 Symbols on the Information Label ........................4 Safety ..................................5 Warnings and Safety Instructions ........................ -
Page 4: Introduction
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: Showgear PowerBOX 4PG User manual Fig. 01 Intended Use This device is intended for professional use as a socket box. It is suitable only for indoor installation. This device is not suitable for households. -
Page 5: Symbols And Signal Words
PowerBOX 4PG Symbols and Signal Words Safety notes and warnings are indicated throughout the user manual by safety signs. Always follow the instructions provided in this user manual. Indicates an imminently hazardous situation which, if not avoided, will result in DANGER death or serious injury. -
Page 6: Safety
PowerBOX 4PG Safety Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. Warnings and Safety Instructions... - Page 7 PowerBOX 4PG Attention Power supply Before connecting the device to the power supply, make sure that the current, voltage and frequency match the input voltage, current and frequency specified on the information label on the device. Make sure that the cross-sectional area of the extension cords and power cables is sufficient for the required power consumption of the device.
-
Page 8: Requirements For The User
PowerBOX 4PG Attention Do not expose the device to conditions that exceed the rated IP class conditions. This device is IP20 rated. IP (Ingress Protection) 20 class provides protection against solid objects greater than 12 mm, such as fingers, and no protection against harmful ingress of water. -
Page 9: Description Of The Device
PowerBOX 4PG Description of the Device The Showtec PSA-63A4C is a socket box for lighting or back-line equipment. The device is suitable for self- made power cables. Front View Fig. 02 Cable gland for the power cable LED power indicator... -
Page 10: Optional Accessories
PowerBOX 4PG Optional Accessories You can additionally purchase the following accessories: Product code: 90659 (PowerBOX clamp) Product code: D9575B (Snap Fastener 22) Dimensions Fig. 03 Installation Safety Instructions for Installation WARNING Incorrect installation can cause serious injuries and damage of property. -
Page 11: Rigging
PowerBOX 4PG Rigging The device can be positioned on a flat surface or mounted to a truss or other rigging structure in any orientation. Make sure that all loads are within the pre-determined limits of the supporting structure. CAUTION Restrict the access under the work area during rigging and/or derigging. -
Page 12: Connecting To Power Supply
PowerBOX 4PG Connecting to Power Supply DANGER Electric shock caused by short-circuit The device accepts AC mains power at 220–240 V and 50 Hz. Do not supply power at any other voltage or frequency to the device. This device falls under IEC protection class I. Make sure that the device is always electrically connected to the ground (earth). -
Page 13: Start-Up
PowerBOX 4PG Start-up Connect one end of your self-made power cable to the cable gland (01). Connect the other end to the appropriate 220–240 V AC power supply. Connect other devices to the Schuko outputs (03). Troubleshooting This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. -
Page 14: Corrective Maintenance
PowerBOX 4PG Attention ● Do not immerse the device in liquid. ● Do not use alcohol or solvents. Corrective Maintenance The device does not contain user-serviceable parts. Do not open the device and do not modify the device. Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for more information. - Page 15 PowerBOX 4PG Product code: 90662...
- Page 16 ©2021 Showgear...
Need help?
Do you have a question about the PowerBOX 4PG and is the answer not in the manual?
Questions and answers