Table of Contents
Advertisement
\
Additional programme
settings
SpeedPerfect G
A d d i t i o n a l p r o g r a m m e s e t t i n g s
For washing in a shorter time with a
washing result comparable to that of the
standard programme.
Notes
Do not exceed the maximum load.
■
Overview of programmes
~ Page 13
SpeedPerfect G is preset by
■
default. To deactivate this additional
default setting, press the
SpeedPerfect G button. The
indicator light goes off.
Water plus Z
Increased water level and additional
rinse cycle, extended washing time. For
areas with very soft water or for further
enhancing the spin result.
Additional programme settings
1
Operating the
appliance
Preparing the washing
O p e r a t i n g t h e a p p l i a n c e
machine
The washing machine must be
Note:
correctly installed and connected.
~ Page 33
Also consider ~ "Before washing for
the first time" on page 39
Connect the mains plug.
1.
Turn on the water tap.
2.
Open the door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
Select programme/switch on
the appliance
If you have activated the
Note:
childproof lock, you must first deactivate
it before you can set a programme.
Childproof lock ~ Page 20
Use the programme selector to select
the required programme. Can be turned
in either direction.
The machine is switched on.
The display panel shows the following
information consecutively for the
selected programme:
The programme duration,
■
The preset spin speed and
■
The maximum load.
■
en
17
Advertisement
Table of Contents
