Denon AVR-S730H Owner's Manual page 166

Contents Connections
13
When the analysis and storage ends, unplug the Sound
calibration microphone from the SETUP MIC jack on the
main unit and then press "Next".
Audyssey Setup
Now Analyzing and correcting the your room data.
Analyzing room data
Back
Front panel Display
Playback
14
NOTE
0 Do not change the speaker connection or subwoofer volume after Audyssey
Setup. If these are changed, run Audyssey
optimum equalizer settings.
Next
166
Rear panel
Settings Tips
Select "Details" and press ENTER to verify the
measurement results.
Subwoofers may measure a greater reported distance than the
0
actual distance due to added electrical delay common in
subwoofers.
Remote Index
Appendix
®
® Setup again in order to configure the