Denon AVR-S730H Owner's Manual page 159

Contents Connections
Speakers
The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called
"Audyssey ® Setup".
You do not have to perform Audyssey
To set up the speakers manually, use "Manual Setup" on the menu. (v p. 169)
Audyssey ® Setup
To perform measurement, place the Sound calibration microphone in
multiple locations all around the listening area. For best results, we
recommend you measure in six positions, as shown in the illustration.
When measuring the second and subsequent positions, install the Sound
calibration microphone within 2 ft (60 cm) of the first measurement position
(main listening position).
0 If you perform Audyssey Setup, Audyssey MultEQ
®
and Audyssey Dynamic Volume
®
Front panel Display
Playback
Setup when you have already performed "Sp.Calibration" in "Setup Assistant".
®
, Audyssey Dynamic EQ
®
functions are enabled. (v p. 141)
Rear panel
Settings
FL SW C
( :Measuring positions)
®
SL
Listening position
159
Remote
Tips Appendix
FR FL
Front speaker (L)
FR
Front speaker (R)
C
Center speaker
SW
Subwoofer
SL
Surround speaker (L)
SR
Surround speaker (R)
SR
Index