Operating The Washer - LG WM2701HV User's Manual & Installation Instructions

Ultra capacity washer with wash motion technology
Hide thumbs Also See for WM2701HV:
Table of Contents

Advertisement

Available languages

Available languages

OPERATING THE WASHER

Once you have loaded the washer and added
laundry products (detergent, bleach, and/or
fabric softener):
1
Press the ON/OFF button to turn on the
2
Turn the cycle selector knob to the desired
3
If you would like to change the settings for
that cycle, press the appropriate cycle set-
tings button(s) until the indicator light for the
desired setting is lit.
NOTE: To protect your garments, not every
wash/rinse temperature, spin speed, soil
level, or option is available with every cycle.
4
Select any additional cycle options, such as
DELAY
WASH
HIGH
HEAVY
LOW
NORMAL
OFF
LIGHT
SOIL LEVEL
BEEPER
NOTE: To protect your garments, not every
wash/rinse temperature, spin speed, soil
level, or option is available with every cycle.
washer. The lights around the cycle
selector knob will illuminate.
cycle. The display will show the
preset Rinse/Wash Temperature,
Spin Speed, Soil Level, and
Option settings for that cycle.
STAIN CYCLE or
DELAY WASH
STAIN
CYCLE
by pressing the
button for that
option.
DELAY
WASH
H O W TO U S E
5
Press the START/PAUSE button to begin
the cycle. The door will latch,
the display will change, and
the washer will calculate the
estimated time remaining. Once
the washer has calculated the estimated
total cycle time, the washer will start. To
pause the cycle at any time, press PAUSE.
NOTE: The cycle time displayed may
appear much longer than that of a top-
loading washer. The displayed time is for the
complete cycle, rather than just the agitation
portion of the cycle, as is typically shown on
a top-loading washer.
NOTE: If the temperature in the washer is
too high, the door cannot be unlocked until
the washer has cooled. If the water level is
too high, select the DRAIN & SPIN cycle to
drain excess water. Do not try to force the
door open.
Washing time can be reduced significantly
for small or lightly soiled loads by selecting
the Speed Wash cycle and setting the Soil
Level button to Light.
6
When the load is finished, the beeper (if set)
will sound and the door will unlock.
Remove damp clothes from the washer
immediately. Check under the door seal
for small items.
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm2701h series

Table of Contents