GTK-XB5
2-10. FRONT PANEL BLOCK-2
Note 1: Make sure to proceed with the top and bottom sides
first because the right and left sides may damage
the sides of the front panel block.
bottom side
2 Insert a thick screwdriver into the right side
and widen the gap (perform at two places).
Note 2: Be careful because if a screwdriver is
inserted too far in, the speaker unit (WF)
may get damaged.
3 Remove the front
panel block in the
direction of the
arrow.
14
1 Insert a thick screwdriver into the left side
front panel block
right side
tweeter cable
and widen the gap (perform at two places).
Note 2: Be careful because if a screwdriver is
inserted too far in, the speaker unit (WF)
may get damaged.
speaker cabinet
4 front panel block
Note 3: When installing the front panel block
remove the used bond and use a new
bond to fix the front panel block.
FFC cable
tting
Note 4: When installing the front panel block,
be careful not to pinch the three cables.
front panel block
woofer cable
speaker cabinet
left side
tweeter cable
woofer cable
–
–
FFC cable