GTK-XB5
2-6.
RIGHT SIDE PANEL, LEFT SIDE PANEL
4 right side panel
Note 1: When installing the right side panel,
remove the used bond and use a new
bond to fix the right side panel.
bond
2 two screws
(M4
16)
2 screw
(M4
16)
1 rubber
(large circle)
2 screw
(M4
16)
3 Remove the right side panel
in the direction of the arrow.
10
1 rubber
(large circle)
2 screw
(M4
16)
rear side
4 left side panel
Note 1: When installing the left side panel,
remove the used bond and use a new
bond to fix the left side panel.
Note 3: When removing the rubber (circle),
insert a sharp-tipped object such as
tweezers into the cutout.
top side
BT board
Note 2: Be careful not to damage
the BT board.
front side
3 Remove the left side panel
in the direction of the arrow.
2 two screws
(M4
16)
2 screw
(M4
16)
tweezers, etc.
rubber (circle)
–
–
bond
2 two screws
(M4
16)
1 two rubbers
(circle)