Install Media Channels; Network Installation Wizard - Philips BFL2114/27 Series Professional Installation Manual

7.6.4

Install media channels

Media channels are local files uploaded in TV that can be installed as a media channel. See chapter
"Examples" on how to install media channels.
It is not possible to add a video stream over the internet as a channel. This has to be done using a
webpage or a video player app.

7.7 Network installation wizard

To connect to a network, you have to go to the [Professional Settings] [Wireless and Networks]
[Connect to Network] menu.
Note: Some screens will be shown depending on your settings or selections made, some screens will not
be shown
o Wired, Wireless, WPS, WPS with PIN code
selection
Note: If you have connected a wired
network cable and you make a wireless
connection, the TV will still give priority on
the wired network over the wireless
network
o When 'Wired' is selected you will go to
the next screen where you will see a
message that the router is contentiously
scanned until a network connection is
found
o Once a network is found you will see a
screen that the wired network is
connected
Note: The yellow connector is to be used
for Serial Xpress and not for a wired
network connection
o When 'Wireless' is selected you will see
that the TV is scanning for wireless
networks and it will show the networks
that were found
o After selecting a network (and entering
the password if needed) you will get
message that the wireless network is
connected, you can also manually add a
new network
o When 'WPS' is selected you will see that
you have to press the WPS button on the
router and press within 2 minutes on the
connect button
o Once you pressed you will get a
'connecting' message
o Once connected you will get a message
- 109 -