LG LTC19340SB Owner's Manual page 13

Fig. 6
• Pry off cover on top refrigerator on left side to uncover
screw holes (See Fig. 7).
• Set freezer door and top hinge parts to the side and
remove refrigerator door.
2. Reversing and Reinstalling Refrigerator Door
• Using a 1/4 inch socket wrench, loosen and remove
hinge pin from the middle hinge bracket. Remove the
washer underneath the hinge and set aside (Fig. 8).
NOTE: At this point, the door will be loose, lift up door
slightly and remove it (See Fig. 9).
Fig. 9
REFRIGERATOR INSTALLATION
Fig. 7
Cover (on top of
refrigerator)
Fig. 8
Hinge
Pin
13
• Loosen and remove the two bolts and the screw to
remove the middle hinge bracket from refrigerator
housing (See Fig. 10). Set parts aside.
• Remove the Base Grille (See "Installation of Base
Grille").
• Remove the washer from the bottom hinge pin. Using
a 1/4 inch socket wrench, loosen and remove the
hinge pin from the bottom hinge (See Fig 11).
• Reattach the hinge pin to the opposite side of the
hinge. (See Fig. 12).
NOTE: This is easier to do while the hinge is still attached.
Fig. 11
Fig. 12
• Using 10 mm or 13/32 inch socket wrench with 2
inch extension, loosen the three bolts and remove the
Bottom Hinge from right side of refrigerator housing
(See Fig. 13).
Fig. 10
Middle
Hinge
Bracket