Advertisement
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any
loose plugs and/or broken, loose, or missing bulbs. Replace
bulbs promptly with the replacement bulbs provided in
order to maintain the performance and life expectancy of
your tree.
Step 1. Connect the light strings of the tree together and
plug the power cord into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the
On/Off button.
Maintenance
Spare parts
This tree package includes hinge pins, washers, bulbs, and
fuses for any replacement or repair that you need to perform
on your tree. If extra parts are needed, contact the Customer
Service Team at 1-877-527-0313 between the hours of 8 am
and 5 pm EST, Monday through Friday.
Repairing Loose Hinges
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the
bracket and secure with a washer.
Use and Care Instructions
1. Before using or reusing, inspect product carefully. Discard
any products that have cut, damaged or frayed wire
insulation or cords, cracks in the lampholders or enclosures,
loose connections, or exposed copper wire.
2. Before disassembling the tree, unplug the tree and remove
all ornaments and decorations.
3. Gently lift the tree top straight up to remove from the
center section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
5. When storing the product, carefully remove the
product from wherever it is placed, including tree,
branches, or bushes, to avoid any
undue strain or stress on the product
conductors, connections, and wires.
Cover the protective cap on the
poles to avoid damaging the internal
parts.
6. When not in use, store neatly in a cool, dry location
protected from sunlight.
User servicing instructions
Fused Lamp Replacement
WARNING - Risk of fire: This product employs overload
protection (fuse lamp) in each series light circuit to provide
overload protection in addition to the fuse(s) located in the
plug. Do not replace the fuse lamp contained in this set with
any other type of lamp, use only spare fuse lamps provided
with this product. In case of a burnt out FUSED lamp, the
entire series of 50 lamps will be out. To replace the fused
lamp:
1. Grasp the plug and remove from
the receptacle or other outlet
device. Do not unplug by pulling
the cord.
2. Locate the fused lamp with gray
color lamp holder. Pull the burnt
fused lamp and plastic lamp base
straight out of the lamp holder.
3. Replace with a spare fused lamp. The fused lamp can be
distinguished by a gray lamp base and an additional clear
plastic cover.
4. Plug in the lights again.
Fuse replacement
1. Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access cover on top
of attachment plug towards blades.
3. Remove fuse carefully.
4. Risk of fire. Replace fuse
only with 5, 7 or 10 Amp, 125 Volt
fuse for the power cord set.
5. Close fuse cover. Slide closed
the fuse access cover on
top of attachment plug.
6. Risk of fire.Do not replace attachment plug. Contains a
safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
Troubleshooting
Problem
Solution
Ensure that all tree sections are plugged
The tree does
into each other and that the tree is
not light
plugged into the wall. If your tree came
with a foot pedal, step on the On/Off
button.
Check for blown fuses at the light string
and power cord plugs. Replace as
needed with the replacement fuses
provided.
Check for loose, broken, or missing bulbs
and replace as needed with the
replacement bulbs provided
Christmas Tree
Model: TG76P5347S00
Sku # 692 528
SPARE FUSE
Advertisement
