Atlantic Furniture PRINTER STAND CROSS PANEL Assembly Instructions

READY
Before attaching your Printer stand cross panels, please read through these
instructions carefully, familiarising yourself with the different parts.
Phillips head
screwdriver
Customer supplied
01
STEP 1
Install wood dowels (a)(b) into the locator holes
on (01)(02) as shown below.
01
a
Repeat with the other panel.
note : panel in center
PRINTER STAND CROSS PANEL
PRINTER STAND CROSS PANEL
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
PARTS LIST
01 CROSS SIDE PANEL
02
LOWER SHELF
a - Wooden dowel
b - Wooden dowel
c - Wood screw
01
02
b
b
02
a
b
c
1/4" X 1 1/4"
3/8" X 1 1/4"
1 1/4"
a
c
STEP 2
Attach first side panel (01) to printer stand
aligning the dowels (a) with the holes in the
apron. Be sure the panel is centered before
tightening the wood screw (c).
c
b
05272009
2 PCS
Assembling by Adult
1 PC
4 pcs
4 pcs
4 pcs
b
01
Page 1 of 2