Braun MG5010 Manual page 8

Shaving
First, remove the protective cap (1a) / adjustable comb (8): Using your thumbs,
press against the side clips of the attachment so that they swing off in the
direction of the arrows (a). Activate the on/off switch (6). The floating foil
frame automatically adapts to your skin surface for a close, smooth shave.
For best results:
• Always shave before washing your face.
• At all times, hold the shaver at right angles (90°) to the skin (b).
• Stretch the skin and shave against the direction of beard growth.
• For pre-shaving after a few days of not having shaved, use the wide trimmer
(4a) to pre-cut long hairs. For a close, smooth shave, finish with the foil.
• To maintain 100% shaving performance, replace your foil and cutter block
at least every 18 months or when worn.
Style
Using the twistable trimmer
The wide trimmer (4a) evenly cuts and trims large areas (c). It is ideal for
shaping sideburns, moustaches and partial short beards. The wide trimmer is
provided with safety rips and a gliding strip for less irritation and easy gliding.
Press the blue stripes to push up the twistable trimmer (4). While stretching
the skin, guide the wide trimmer against the direction of hair growth.
The narrow trimmer (4b) precisely defines lines and edges (d), being ideal for
precise contouring.
To use the narrow trimmer, push up the twistable trimmer and turn it 180°.
Frequent use of the twistable trimmer will reduce the battery capacity.
Trim
Using the trimming attachments (1b) and (8)
Place the respective trimming attachment onto the shaver foil (2) and press it
against the shaver housing until it snaps into place with a click (e).
3-day beard comb & protective cap (1b): This attachment is perfectly suited
for creating a stubble look and maintaining it.
• Place the attachment onto the foil (2) and push up the twistable trimmer (4).
Turn on the shaver and use the appliance as shown in the illustration (e).
The attachment ensures an optimum usage angle.
8