Connectors - Axis F101-A XF P1367 User Manual

AXIS P1367 Network Camera
Specifications
• Ensuring the camera is level. Press the button for not more than two seconds to start the levelling assistant and press
again to stop. The status LED and buzzer signal (see ) assist levelling of the camera. The camera is level when the buzzer
beeps continuously.
• Resetting the product to factory default settings. See or
• Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the
status LED flashes green.
• Connecting to a one-click cloud connection (O3C) service over the internet. To connect, press and hold the button
for about 3 seconds until the status LED flashes green.

Connectors

Network connector
The Axis product is available in two variants with different network connectors:
RJ45 Ethernet connector.
RJ45 Ethernet connector with Power over Ethernet (PoE).
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
RJ45 with High Power over Ethernet (High PoE).
RJ45 Push-pull Connector (IP66) with High Power over Ethernet (High PoE).
RJ45 Ethernet service port.
D-coded M12 connector with Power over Ethernet (PoE).
SFP connector.
Input: RJ45 Ethernet connector with Power over Ethernet (PoE).
Output: RJ45 Ethernet connector with Power over Ethernet (PoE).
NO NOTICE NO TICE TICE
Use the supplied midspan.
NOTICE TICE
NO NO TICE
Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network
cable (STP) may be appropriate or required. All cables connecting the product to the network and that are routed outdoors
or in demanding electrical environments shall be intended for their specific use. Make sure that the network devices are
installed in accordance with the manufacturer's instructions. For information about regulatory requirements, see .
NOTICE TICE
NO NO TICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall
be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer's
instructions. For information about regulatory requirements, see .
NO NOTICE NO TICE TICE
The product shall be connected using a shielded network cable (STP) or an optical fiber cable. All cables connecting the
product to the network shall be intended for their specific use. Make sure that the network devices are installed in accordance
with the manufacturer's instructions. For information about regulatory requirements, see .
30