Snmp 3; Snmp Group; Cli Configuration; Web Configuration - Tripp Lite NGI-S08C2POE8 Owner's Manual

8.2. SNMPv3
SNMP version 3 (SNMPv3) supports authentication and encryption. SNMPv3 uses the
user-based security model (USM) for message security and the view-based access control
model (VACM) for access control. USM specifies authentication and encryption.
8.2.1. SNMPv3 Group

8.2.1.1. CLI Configuration

Node
enable show snmp group
enable configure terminal
snmp group GROUPNAME
configure noauth (read STRINGS write
STRINGS notify STRINGS)
snmp group GROUPNAME
configure auth (read STRINGS write
STRINGS notify STRINGS)
snmp group GROUPNAME
configure priv (read STRINGS write
STRINGS notify STRINGS)
configure no snmp group GROUPNAME

8.2.1.2. Web Configuration

Parameter
Group Settings
Command
Description
Description
This command displays all snmp v3 group.
This command changes the node to configure
node.
Configurs v3 group of non-authentication.
Configurs v3 group of authentication.
Configurs v3 group of authentication and
encryption.
This command removes a v3 group from
switch.
139