Elo Touch Solutions ET5502L User Manual page 12

Touch On-Screen Display (OSD)
This monitor uses an easy-to-navigate Touch OSD interface. Use the settings menu in the
green sidebar to make adjustments to the monitor display settings.
Example of the Popup OSD Menu:
Select the
desired
OSD
Setting
Menu from
here
Refer to table below for OSD details.
Parameter
Video Source
Auto Scan
Video Port
Discovery
Brightness
Brightness
Sensor
Color Sensor
Contrast
When enabled, the monitor will actively scan for new video port inputs.
Default: Enabled
When enabled, the monitor will automatically switch if a new video port is
connected.
Default: Enabled
Adjust the brightness of the display.
Default: 100
The light sensor can be toggled on or off. When the light sensor is enabled,
the brightness cannot be changed manually.
See section " Intelligent Brightness Control and Color Sensor Functionality"
below.
Adjust the contrast of the display.
Default: 50
Available Adjustment
Change
Brightness
by sliding
this green
bar.
Select the
desired
Video
Source
from here
User Manual: Interactive Digital Signage
SW602296 Rev D, Page 12 of 34