ZyXEL Communications P-330W User Manual page 31

Enable Log
Enable Remote Log
Save
Refresh
Clear
IP Filtering
Enable IP Filtering
Local IP Address
Protocol
Description
Current Filter Table
Save
Reset
Click to enable log function.
Click to enable the remote log function. The log record will be
saved into a remote server.
System all:
Wireless only:
Dos only:
After completing the settings on this page, click Save to save the
settings.
Click to refresh the logs.
Click to delete the logs.
Check to enable the IP filtering function.
Enter the client IP address.
Select the protocol (TCP, UDP or Both) used to the remote system
or service.
You may key in a description for the local IP address
Shows the current filter information.
After completing the settings on this page, click Save to save the
settings.
Click Reset to restore to default values.
29