Comfort Glow CG3324PTA Manual page 31

OPTIONAL
POSITIONING
OF THERMOSTAT
SENSING BULB
For Masonry and
Factory-built
Metal Fireplace
Continued
102651
Thermostat
Sensing Bulb
Adhesive-backed
Mounting Clip
Figure 31 - Locating Thermostat Sensing Bulb on Masonry Fireplace
If you have a factory-built metal fireplace, see Figure 32 for location.
Thermostat
Sensing Bulb
Adhesive-backed
Mounting Clip
Figure 32 - Locating Thermostat Sensing Bulb on Factory-built Metal Fireplace
If your fireplace has glass doors, position sensing bulb directly behind door gap
on right bottom side (see Figure 33).
Thermostat
Sensing Bulb
Adhesive-backed
Mounting Clip
Figure 33 - Installing Thermostat Sensing Bulb behind Glass Doors
5. The mounting clip must be a minimum of 3" from bottom of fireplace to
prevent crimping of capillary. Once you have decided on a location, clean the
area thoroughly. Remove the paper backing from the adhesive on back of
mounting clip. Press the clip into the new location so that the thermostat
sensing bulb will be positioned vertically with the capillary at the bottom (see
Figure 34). Slide the thermostat sensing bulb into the clip.
Do not crimp capillary.
IMPORTANT:
Figure 34 - Positioning the Thermostat Sensing Bulb in the Vertical Position
Q Q
Q Q
Q Q Q Q
Q Q Q Q Q
Capillary
with the Capillary at the Bottom
Glass
Doors
Thermostat
Sensing Bulb
Adhesive-backed
Mounting Clip
Do Not Crimp Capillary
31