Pillow Speaker Connection & Setup - LG Zenith H20J54DT Installation Manual & Warranty

Pillow Speaker Connection & Setup
Pillow speaker is not included with the HealthView TV
Pillow Speaker Setup
1
Locate the Pillow Speaker output jack on the back of
the HealthView TV.
2 Connect an accessory pillow speaker or wired remote
control unit to this 6-pin jack.
3
Connect the pillow speaker as shown in the illustration.
Set the Pillow Speaker switch to Pillow Speaker setting.
4
Note: Once the switch is set to Pillow Speaker, no audio
will be heard from the TV speakers.
Use a pillow speaker by Curbell, Model A-16455-02 or
other UL recognized pendant control bearing the warn-
ing: "Risk of fire if used in oxygen enriched atmos-
phere. Keep pendant control away from oxygen
equipment."
TV
Page 14
Antenna
Digital
Cable
Antenna
M.P.I.
M.P.I.
TV Back Panel
(Expanded View)
Controlling the TV with Serial Data
The TV is capable of being controlled by a single-
wire, serial data signal. This is a Zenith patented
technology and is being implemented by certain
brands of "smart" pillow speakers, such as Curbell's
"GEN-II" models.
TV Back
TV
SPKR
PILLOW
Video Speaker
SPKR
In Out
PILLOW SPEAKER
Audio
In
206-4065