Cable Service With Vcr - LG Zenith H20J54DT Installation Manual & Warranty

Hook Up a Cable Box with VCR
Connect a cable box and VCR to the TV

Cable Service with VCR

1
Locate the In jacks on the cable box and the
VCR.
Connect a 75 ohm cable between the cable box
2
wall jack and Cable In on the cable box.
Connect a 75 ohm cable from the Cable out jack
3
on the cable box to the Ant In jack on the VCR.
Connect a 75 ohm cable between the VCR out
4
jack on the VCR and the Antenna/Cable In jack
on the TV.
Connect a 75 ohm wire to the Digital Antenna
5
input on the TV to get digital programming.
6 Make the other VCR-TV connections as indicated
in the illustration.
For cable service without a cable box, connect a
75 ohm cable between the cable wall jack and
the VCR In jack.
No A/V cables are
included with the TV.
Antenna
RF Coaxial Wire
(75 ohm)
206-4065
Antenna
Digital
Cable
Antenna
TV SPEAKER
M.P.I.
M.P.I.
Off Air
Cable TV
Wall Jack
Cable Box
In
Out
Output
Switch
3 4
VCR Back
VCR Back AV Panel
output
In
switch
3 4
Out
Video Audio
RF Coaxial Wire
(75 ohm)
Typ ical
TV Bac k
A/V cables
not included
with TV
VIDEO IN SPEAKER OUT
Page 11