Advertisement
Contents
Connections
DC12V 150mA MAX.
STRAIGHT CABLE
1 CBL/SAT
2 DVD
1 TV
AUDIO
1
2
PHONO
COAXIAL
AUDIO
TRIGGER OUT
REMOTE CONTROL
RS-232C
DIGITAL AUDIO
(ASSIGNABLE)
FRONT
FRONT
CENTER
SURROUND
SURROUND
Q2
Q3
Q4
Q5
L SIGNAL GND terminal
Used to connect a ground wire for the turntable. (v p. 92)
M TRIGGER OUT jacks
Used to connect devices equipped with the trigger function.
(v p. 98)
N REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to operate this
unit and external devices from a different room. (v p. 97)
Front panel
Display
Playback
HEIGHT3
HEIGHT3
HEIGHT4/FRONT WIDE
HEIGHT4/FRONT WIDE
2 CD
OPTICAL
ASSIGNABLE
ASSIGNABLE
SURROUND BACK
SURROUND BACK
HEIGHT1
HEIGHT1
HEIGHT2
ASSIGNABLE
ASSIGNABLE
ASSIGNABLE
SPEAKERS
Q6
Q7
Rear panel
Settings
O RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner's manual of the home
automation controller for more information about serial control of this
unit.
Perform the operation below beforehand.
A Turn on the power of this unit.
B Turn off the power of this unit from the external controller.
HEIGHT2
C Check that the unit is in the standby mode.
P Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
"Connection 2 : TV equipped with an HDMI connector and
0
incompatible with the ARC (Audio Return Channel) / eARC
(Enhanced Audio Return Channel)" (v p. 84)
"Connection 3 : TV equipped without an HDMI
0
connector" (v p. 85)
"Connecting a set-top box (Satellite tuner/cable TV)" (v p. 87)
0
"Connecting a DVD player or Blu-ray Disc player" (v p. 88)
0
Q Speaker terminals (SPEAKERS)
Used to connect speakers. (v p. 42)
NOTE
0 Do not touch the inner pins of the connectors on the rear panel. Electrostatic
discharge may cause permanent damage to the unit.
27
Remote
Tips
Appendix
Index
Advertisement
