Advertisement
Contents
Connections
Wireless LAN
When connecting to the network via wireless LAN, connect the external
antennas for Bluetooth/wireless connectivity connection to the rear panel
and stand them upright.
See "Wi-Fi Setup" on how to connect to a wireless LAN router.
(v p. 250)
Internet
Router with access point
DC12V 150mA MAX.
STRAIGHT CABLE
1 CBL/SAT
2 DVD
1 TV
2 CD
AUDIO
1
2
PHONO
COAXIAL
OPTICAL
AUDIO
TRIGGER OUT
REMOTE CONTROL
RS-232C
DIGITAL AUDIO
(ASSIGNABLE)
FRONT
FRONT
CENTER
SURROUND
SURROUND
SURROUND BACK
Front panel
Display
Playback
Modem
To WAN side
HEIGHT3
HEIGHT3
HEIGHT4/FRONT WIDE
HEIGHT4/FRONT WIDE
ASSIGNABLE
ASSIGNABLE
SURROUND BACK
HEIGHT1
HEIGHT1
HEIGHT2
HEIGHT2
ASSIGNABLE
ASSIGNABLE
ASSIGNABLE
SPEAKERS
Rear panel
Settings
0 When using this unit, we recommend you use a router equipped with the following
functions:
0 Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
0 Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching hub with a
speed of 100 Mbps or greater.
0 Only use a shielded STP or ScTP LAN cable (readily available at electronics
stores). (CAT-5 or greater recommended)
0 The normal shielded-type LAN cable is recommended.
If a flat-type cable or unshielded-type cable is used, other devices could be
affected by noise.
0 When using this unit connected to a network with no DHCP function, configure the
IP address, etc. in "Network". (v p. 249)
NOTE
0 The types of routers that can be used depend on the ISP. Contact your ISP or a
computer shop for details.
0 This unit is not compatible with PPPoE. A PPPoE compatible router is required if
your contracted line is not set using PPPoE.
0 Do not connect a NETWORK connector directly to the LAN port / Ethernet
connector on your computer.
0 Various online services may be discontinued without prior notice.
96
Remote
Tips
Appendix
Index
Advertisement
