Chapter 3 Specifications - Lexicon MPX 200 Service Manual

Chapter 3 Spec i fications
Analog Inputs
Connectors: 1/4" unbalanced
Impedance: 500KΩ unbalanced for Direct Instrument input (unit detects a mono input on the right
input)
A/D Dynamic Range: >95dB typical, 20Hz-20kHz, unweighted
Levels: -30dBu to +4dBu
Resolution: 24-Bit
Analog Outputs
Connectors: 1/4" unbalanced
Impedance: 75 Ohms for Headphone output (Right only used for mono output; Left only used for
stereo headphones)
D/A Dynamic Range: >100dB typical, 20Hz-20kHz, unweighted
Levels : +8dBu typical
Resolution: 24-Bit
Frequency Response: Wet/Dry 20Hz-20kHz, ±1dB
Crosstalk: >55dB
THD: <0.05%, 20Hz-20kHz
Digital Audio Interface
Input Connectors: Coaxial, RCA type; Digital S/PDIF
Output Connectors: Coaxial, RCA type; 24-bit Digital S/PDIF (always active)
Sample Rates: 44.1kHz
Internal Audio Data Path: DSP: 24-bit
Footswitch: Tip/Ring/Sleeve phone jack for Bypass and Tap (optional)
System Specifications
Power Requirements: 100-120/220-240V~; 50-60Hz, 25W
Environment
Operating Temperature: 32° to 104° (0° to 40°C)
Relative Humidity: 95% non-condensing
Dimensions: 19"W x 1.75"H x 5.5" D (483x45x140mm)
Weight: Unit: 3.15lb (1.41kg)
Lexicon
3-1