Introduction; Specification - Sealey SDH50.V3 Quick Start Manual

50l industrial dehumidifier
Table of Contents

Advertisement

2. INTRODUCTION

Powerful dehumidification capacity, extracts up to 50 litres of water per day. Removes excess moisture from air, preventing build-up of mildew
and mould. Features auto-defrost function, which activates if the room temperature falls too low. The unit has a 24hr timer function for delay
starting and auto shut off. Washable activated carbon air filter. Refrigerant is environmentally friendly R290. May be connected to a drain
hose for continuous operation. Mounted on castors for manoeuvrability.

3. SPECIFICATION

MODEL NO: .........................................................SDH50.V3
CO2 Equivalent: ......................................................... 0.0006t
Condensate Tank: .............................. 7L (with Auto Shut-Off)
Dehumidifying Capacity: ..................... 50L/day(30°CRH80%)
Freezing Pressure (Max): ...........................................2.5MPa
Global Warming Potential (Rating): ...................................... 3
IP Rating: ........................................................................IP22
Maximum Airflow: .....................................................350m³/hr
Power: ...............................................Max./Rated - 900/750W
Refrigerant: ..........................................................R290/0.2kg
Steaming Pressure (Max): .........................................1.0MPa
Supply: ...........................................................................230V
Working Space: .......................................................50-120m³
Working Temperature: .................................................5-35°C
© Jack Sealey Limited
Original Language Version
fig.1
SDH50.V3 Issue 1 30/03/2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SDH50.V3 and is the answer not in the manual?

Questions and answers

Table of Contents