Specification - Sealey SDH70.V3 Manual

70l industrial dehumidifier
Table of Contents

Advertisement

2. INTRODUCTION
Powerful dehumidification capacity, extracts up to 70 litres of water per day. Removes excess moisture from air, preventing build-up of mildew
and mould. Features auto-defrost function, which activates if the room temperature falls too low. The unit has a 24hr timer function for delay
starting and auto-shut-off. Washable air filter. Refrigerant is environmentally friendly R290. Features a permanent drain hose for continuous
operation. Mounted on castors for manoeuvrability.

3. SPECIFICATION

MODEL NO: .........................................................SDH70.V3
CO
Equivalent: .......................................................... 0.0006t
2
Dehumidifying Capacity: .................... 70L/day(30°C RH80%)
Freezing Pressure (Max): ...........................................2.5MPa
Global Warming Potential (Rating): ...................................... 3
IP Rating: ........................................................................IP22
Maximum Airflow: .....................................................400m³/hr
Power: R ated-950W ( 27°C RH60%) Max-1300W(30°C RH80%)
Refrigerant: ........................................................R290/0.28kg
Steaming Pressure (Max): .........................................1.0MPa
Supply: ...........................................................................230V
Working Space: .......................................................80-160m
Working Temperature: .................................................5-35°C
HANDLE
(SECTION 4.1)
FILTER SCREEN
WITHDRAWAL TAB
(SECTION 6.5.7)
DRAIN HOSE
(SECTION 5.1.1)
© Jack Sealey Limited
2
Original Language Version
CONTROL PANEL
(SECTION 5.2)
fig.1
SDH70.V3 Issue 2 (5) 19/05/22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SDH70.V3 and is the answer not in the manual?

Questions and answers

Table of Contents