Advertisement
4
Notes on Use - for correct operation of the Product-
)
OFF
Note the following when you use the Flash Backup Unit. If you ignore the notes, your assets
(including important data and/or other devices) may be damaged.
The Flash Backup Unit is the Product for connecting to the RAID Controller at the
Express5800 series. You can not use for the other purpose.
The Flash Backup Unit is an extremely sensitive electronic device. First make your body
contact with metallic frame of the server to discharge static electricity from your body
before handling the Flash Backup Unit. Do not drop the Flash Backup Unit. Do not make
the Flash Backup Unit hit against other objects.
For the supported system, RAID Controller, ask your sales representative.
Please turn off a power supply of a cellular phone near the mainframe by which the Flash
Backup Unit is had built-in. A radio wave causes a malfunction.
This Manual
Windows
The guide is intended for persons who are familiar with operating systems including Windows and
fundamental operations of general-purpose I/O devices including the keyboard and mouse.
Signage
The following conventions are used throughout this User's Guide. For safety symbols, see
"SAFETY INDICATIONS" provided earlier.
Items to be observed or points to be noted when operating the
Notice
product.
Items to be checked when operating the product
Check
Information useful or convenient for you
Tips
Data Backup
The device failure due to shock or thermal changes, as well as operator's misconduct, may cause
loss of data. To avoid loss of data, NEC recommends that you should make a back-up copy of
your valuable data on a regular basis.
Transportation
To transport the Flash Backup Unit, remove the Flash Backup Unit from the server and put it in the
shipping carton along with accessories.
Spare Parts
The spare parts of your Flash Backup Unit are available within five years from EOL.
(
Express5800
RAID
RAID
Transfer to Third Party
Make sure to provide this manual along with the Flash Backup Unit to a third party.
(
Windows Linux
Notice
PHS
(
About data on the Physical Device
Be sure to take appropriate measures not to leak important data (e.g.,
customers' information or companies' management information) on the
removed Physical Device to any third parties.
Data seems to be erased when you empty "Recycle Bin" of Windows or
execute the "format" command of the operating system. However, the
actual data remains written on the Physical Device. Data not erased
completely may be restored by special software and used for
unexpected purposes.
It is strongly recommended that the software or service (both available at
stores) for data erasure should be used in order to avoid the trouble
explained above. For details on data erasure, ask your sales
representative.
NEC assumes no liability for data leakage if the product is transferred to
third party without erasing the data.
To transfer or sell any software application that comes with the product to a third party, the
following requirements must be satisfied:
All provided software applications must be transferred and no backup copies must be retained.
Software applications must be uninstalled before transferring the product.
Disposal
Dispose of the Flash Backup Unit according to all national laws and regulations.
It is the user's responsibility to completely erase or modify all the data
Notice
stored in storage device such as Physical Device, backup data cartridge,
floppy disk, or any other media (CD-R/CD-RW) so that the data cannot
be restored.
In the Package
The carton contains various accessories, as well as the Flash Backup Unit itself. See the packing
list to make sure that you have everything and that individual components are not damaged. If you
find any component missing or damaged, contact your sales agent.
)
)
(
)
(
)
Advertisement
