Sharp LC-60 EQ10U Service Manual page 116

LC-60/70EQ10U,SQ10U/15U/17U,TQ15U,UQ17U
4. Removing of 60" LCD Panel Module Unit, LCD CONTROL Unit, MAIN Unit, POWER/DRIVE Unit.
1. Remove the 21 Hooks and Detach the 60" LCD Panel Module Unit (1).
2. Remove the 2 Connecting Cords(FFC80P) (2), 2 Connecting Cords(FFC64P) (17), 4 Ferrite Cores (18).
3. Remove the 6 lock screws (3) and detach the LCD CONTROL Unit (4).
4. Remove the 2 lock screws (5) and detach the Terminal Angle (Side) (6).
5. Remove the 1 lock screw (7) and detach the Terminal Angle (Bottom) (8).
6. Remove the 4 lock screws (9) and detach the MAIN Unit (10).
7. Remove the 6 lock screws (11) and detach the POWER/DRIVE Unit (12).
8. Remove the 12 lock screws (13) 2 Stand Fix Angles (14).
9. Remove the 16 lock screws (15) 4 VESA Angle Ass'y (16).
Terminal Angle (Side) 6
9
10
MAIN
Unit
7
16
14
15
13
13
13
4 – 5
5
Terminal Angle
(Bottom)
8
15
15
16
15
14
13
13
13