Table of Contents
Advertisement
3.2.2 PTZ / Function
***PTZ/Function/PTZ Limit
①
Max Elevation
②
Enable
③
Up Line/Down Line
***PTZ/Function/Time task
④
Enable
⑤
Time Task No.
⑥
Time Task Action
⑦
Auto Home
⑧
Period Setting
***PTZ/Function/PTZ restart
⑨
PTZ restart
***PTZ/Function/Default
⑩
Default
*** Fixed-basis cameras do not support Rotation (PTZ function)
Description
Choose the tilt angle limit from the drop down list. For HDZ302DE, it supports -20° to 10°. For
HDZ302D and HDZ302DIN, it supports 0° to 10°.
Click to enable the PTZ limit function. The Up and Down lines must both be set before enabling
PTZ Limit.
Manually set the PTZ limit Up and Down lines before enabling the function. Use the PTZ
controls to move to the desired position and press Setup to set that Up/Down line limit. Check
the Enable box when both Up and Down lines are set. When enabled, clicking Live will move
the camera to the set Up/Down line position.
Description
Check the box to enable the time task function.
Select time task No. to set. (1 to 4)
Here you can set preset, auto scan, pattern, or tour to perform.
Set auto home function time to go to the home position after performing the action and the
set amount of time.
Setup the schedule to start the time task.
Description
Reboot the PTZ.
Description
Restore PTZ factory default setup.
17
Advertisement
Table of Contents
