Headset Jack; Basic Operation; Shot Detection - Competition Electronics ProTimer BT Operating Manual

Headset Jack

A standard 3.5mm stereo headset jack is located on the side of the unit. The Piezo
beeper is disabled when a headset is connected for a private practice session. The
beeper volume control will also change the headset volume level.

Basic Operation

If you haven't done so already, advance through the 14 menu screens and make any
adjustments to the default settings to suit your needs.
• The active settable value will be flashing.
• Some of the screens have more than one settable value, which will require
multiple presses of the menu button to advance.
• When changing a setting with the
advance the digits automatically
• Settings are automatically saved.
Pressing the START
home screen and begin a new string.

Shot Detection

Each time a shot is detected, it will be added to the shot string. The ProTimer BT will
automatically calculate the split time, which is the time between the current shot
and the previous shot. The ProTimer BT can store up to 70 shots per string.
Subsequent shots will be stored by overwriting the previous value of shot number
70. If a shot is detected after 199.9 seconds, the display will "wrap-around" and start
over, so the actual time would be 199.9 + the displayed value.
5
Pro Timer
SET
button from all screens (except Clear Data) will return to the
BT
buttons, if you hold the button, it will