Bushnell CELLUCORE 24 Instruction Manual page 7

3. Log in and click the Camera icon
at the bottom of the screen, then
click "+" to add a new camera. Scan
the QR code on the veiw screen of
your Cellucore 24 or manually or
enter its serial # to associate this
camera with your account.
4. Install 12 AA batteries (Energizer®
lithium batteries are recommended.
Alkaline batteries may be used
but battery life will be shorter.
x12
Rechargeable batteries are not
recommended). Be sure to position
the batteries for correct polarity
(+/-) when installing.
5. Install a new SD card, up to 32GB.
High speed cards (class 6 or higher)
are recommended if you plan to
record video clips.
6. At the location where you
will place the camera, move the
power switch to the On position.
The camera's default settings
off on
were chosen for typical usage as
a scouting camera for hunters:
photo mode at 2MP resolution,
with a 10 second interval between
photos, and "Medium" LED flash
power output. These settings may
7