Patriot Lighting GTIND001 Installation Instructions

Assembly & Installation Instructions: 370-5439 | 10ft LED String Light
Installation Instructions: 348-0126 (M-FP-12W) | 1 ft x 2 ft 2500 Lumen LED Flat Panel Light
PRE-INSTALL
PRE-INSTALLATION:
1.
Before assembly compare package contents with list to make sure
1. Before assembly, compare package contents
all parts are present.
with parts list to make sure all parts are present.
2.
Shut off power at circuit breaker before removing existing fixture. If
2. Shut off power at circuit breaker before removing existing fixture. If you are unfamiliar with electrical
you are unfamiliar with electrical installations, we recommend you
installations, we recommend you have a qualified electrition complete your intallation.
have a qualified electrician complete your installation.
3.
3. Select suitable location that can support the weight of the fixture. Determine mounting method (Page 2). Select suitable location that can support the weight of the fixture.
Determine mounting method (Page 2.).
4. Mark two spots on the ceiling 42" apart for the mounting hardware (not included).
4.
Using the Color Temperature Guide Card select whichever color
temperature best fits your environment
HARDWARE:
HARDWARE
2 ea Fixture Mounting
Screws (#8)
CC
3 ea Wire Nuts (#10)
Question/Comment/Missing Part?
Question/Comment/Missing Part?
1 ea Fixture Pan (#1)
- When using product, basic precautions should always be followed.
- Read and follow these instructions and heed all warnings.
- Carefully read and understand the information given in this manual
before beginning installation. Failure to do so could lead to electric
shock, fire, or other injuries which could be hazardous or even fatal.
- Save these instructions and warnings.
- Use carabiner hook to hang product, do not use the electrical cord.
- Do not install on radiant heated ceiling.
- This item is designed for dry use and is not water proof.
- Do not place this item in a humid or dusty environment.
- Do not use in areas with temperature higher than 104° Fahrenheit.
- Do not use in areas near a gas source.
AA
DD EE
2 ea Fixture Mounting 2 ea Fixture Mounting
Screws (#8) Screws (#8)
3 ea Wire Nuts (#10) 3 ea Wire Nuts (#10)
TO AVOID RISK OF ELECTRICAL SHOCK TO AVOID RISK OF ELECTRICAL SHOCK
TURN OFF OR DISCONNECT FROM POWER TURN OFF OR DISCONNECT FROM POWER
WHILE INSTALLING OR SERVICING UNIT
WHILE INSTALLING OR SERVICING UNIT
TOOLS REQUIRED:
AA
BB
Part
AA
BB
FF
BB
CC
Customer Service 1-800-205-6201
Customer Service 1-800-205-6201
WARNING: WARNING:
CAUTION:
1. Before starting installation of this fixture or removal of a previous
fixture, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.
Measuring Tape
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY
ELECTRICAL QUESTIONS. If you have any non-electrical
questions about this fixture, please call our Customer Service Team at
1-877-527-0313 or visit www.homedepot.com. Please reference your
SKU (204-960) or UPC (046335960640).
3. KEEP your receipt and these Instructions for Proof of Purchase.
Pre-Installation
TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY (not
TOOLS REQUIRED
included):
Pre-Installation Pre-Installation
TOOLS REQUIRED TOOLS REQUIRED
FLATHEAD #2 PHILIPS
Phillips Screw Driver
Phillips SCREWDRIVER SCREWDRIVER Power Drill Phillips
screwdriver screwdriver
HARDWARE INCLUDED
Part Description
5/16" Drill Bit
SAFETY
GOOGLES
HARDWARE INCLUDED HARDWARE INCLUDED
AA Chain
Description Qty Part
NOTE: Hardware not shown to actual size. NOTE: Hardware not shown to actual size.
Mounting Plate 1 DD
BB "S" Hook
EE
Toggle Bolts 4
Part
AA BB CC
AA
Wire Nuts 3 FF
BB
CC
Part Description Part Description
DD
AA Mounting Plate (8.07 in. x 9.8 in. x 0.47 in.) AA Mounting Plate (8.07 in. x 9.8 in. x 0.47 in.)
BB 3/16 in. Toggle Bolts BB 3/16 in. Toggle Bolts
CC Wire Nuts CC Wire Nuts
DD Screws #8-32 x 1 in. DD Screws #8-32 x 1 in.
DISTANCE
3 FT.
LIGHTING DISTRIBUTION LIGHTING DISTRIBUTION
5 FT.
DISTANCE CENTER BEAM (FOOT CANDLES) DISTANCE BEAM DIAMETER CENTER BEAM (FOOT CANDLES)
Power Drill
Tools required
Phillips Power Drill
screwdriver
Power Drill
WIRE CUTTERS 1/2 in. Drill Bit WIRE STRIPPERS Power Drill 1/2 in. Drill Bit
Quantity
1/2" Drill Bit
NOTE: Hardware not shown to actual size.
ELECTRICAL TAPE
2
Description Qty
Page 3
Mounting Screws 2
AA BB CC
2
Drywall Anchor 4
Description Quantity
AA DD BB CC DD
Mounting Plate (8.07 in. x 9.8 in. x 0.47 in.) 1
Drywall Screws 4
3/16 in. Toggle Bolts 4
Wire Nuts 3
Quantity Quantity
Screws #8-32 x 1 in. 2
1 1
4 4
3 3
2 2
LIGHTING DISTRIBUTION
CENTER BEAM (FOOT CANDLES) BEAM DIAMETER
39 8.9 FT.
14 15 FT.
BEAM DIAMETER
1/2 in. Drill Bit
DD