NAPCO GEM-DK1CA Operating Manual page 18

A C T I V A T E
D I A L E R T E S T
T O A R M I N 1 - 4 H R S
P R E S S 1 - 4
18
F U N C T I O N M E N U
Activate Telephone Test?
communicator test to the central station. A communication failure will be indicated
Y / N
at the keypad by a system trouble "E03-FAIL TO COMM" display. Repeat the test
to attempt to correct a communication failure, as any successful communication
will clear this display.
Delay Arming 1-4 hours. (Not for UL-listed systems). Your system may be set to
arm automatically after a delay period of 1 to 4 hours.
/ N
To Delay Arm the system:
• With the function "TO ARM IN 1-4 HRS" displayed in the window, e nter the
desired Delay Arming time in hours (
At the end of this 1 - 4 hour Delay Arming period, the siren will sound a 2-second
warning and the keypad will begin a 15-minute arming countdown with the sounder
pulsing. The sounder may be silenced at this time by pressing
back on with a steady warning tone 1 minute prior to arming, at which time the
building must be exited.
The same steps can be used to delay a scheduled Auto Arming, if your system has
been programmed as such.
(Telephone Test programmed?
1, 2, 3
Sends a
YES NO).
U
), followed by
,or
4
, but it will turn
C
.