Advertisement
ASSEMBLY NOTES
Additional Tools Required for Assembly
Tape Measure
Phillips Screwdriver
Claw Hammer or Rubber
Mallet
14mm Deep Well Socket
Phillips Head Screw Bits
Pre-Assembly Advice
Depending on your experience, assembly of our play sets can take as little as 6 hours up to
24 hours, including checking inventory of part; therefore, we recommend you set aside a full
two days for assembly.
Identify all the parts for your play set. Empty each box and lay out boards so you can see
each part. Your instruction book will have detailed drawings that will make it easy for you to
recognise individual parts. Keep all hardware and metal parts separate from wooden
pieces.
After everything is laid out, check carefully to ensure all parts are present. Make sure there
are no broken boards.
Find an area to sort your hardware. It is best to open the hardware on a solid surface so that
you do not lose any pieces in the grass. This will save time and familiarise you with all the
different pieces in the hardware bag.
As fresh timber acclimates to its new environment, the natural tendencies of the tree can
show itself in the form of checks or "cracks" in the lumber. In almost all cases this is normal
and it will not affect the structural integrity of your play set.
Cosmetic defects that do not affect the structural integrity of the product or natural defects
of wood such as warping, checking or any other physical properties of wood that do not
present a safety hazard, are not covered by this warranty.
Defects that develop because the products are exposed to extreme climate conditions are
not covered by this warranty. Defects that develop as a result of faulty or improper
installation of the product are also not covered by this warranty.
Most cracks are not warrantable, however if you believe that the integrity of your play set is
compromised by this natural occurrence, please contact the Dealer that you purchased
610mm Level
Cordless Drill or Electric
Drill
Pliers or Vise Grips
19mm Deep Well Socket
An adult with two adult helpers
Angle Square
10mm Drive Ratchet or
Electric Impact Gun
11mm Deep Well Socket
3mm, 6mm, 14mm and Drill
Bits
9
Advertisement
