Type
Status (blinking at long intervals:
On for 1s and then Off for 1s;
Blinking at short Intervals: On for
0.2s and then Off for 0.2s)
Battery
system
indication
Display green
Steady red
7
Device Commissioning
Upgrading the SmartLogger
7.1
SmartLogger V300R001C00SPC050 and later versions support batteries. Before deployment,
upgrade the SmartLogger. After the upgrade, reconnect the SmartLogger and set battery
parameters.
1. If the device is not connected to the FusioSolar management system, you are advised to use a
USB flash drive for upgrade. You can insert the USB flash drive with the upgrade package and go
to the device upgrade screen to start the upgrade.
2. If no USB flash drive is available, log in to the SmartLogger WebUI by referring to section 8.1
and choose Maintenance > Firmware Upgrade.
Device Commissioning(FusionSolar APP)
7.2
7.2.1
Downloading the App
Meaning
N/A
Indicates battery level. One bar represents 10%.
The first three bars indicate the number of
faulty battery expansion modules.
20
Need help?
Do you have a question about the LUNA2000-NHS0 and is the answer not in the manual?
Questions and answers