Filmcity FC-A6360-CHRS Assembly Manual page 2

Camera Cage with Top Handle Setup

Attach the quick release plate of your
tripod head to the sliding base plate and
tighten it using a screwdriver. Mount the
sliding base plate on the fluid head and
secure it correctly with the help of a knob.

Slide the rod adapter onto the sliding plate
and lock it with the help of the knob, as
shown.

Insert 300mm female threaded rods into
the rod adapter and tighten the knob.

Attach the camera with cage and tighten it
with the help of screw driver.

Attach a quick release plate of rod adapter
to the cage and tighten it with the help of a
screwdriver. Then slide it onto the rod
adapter and securely tighten it with a knob.

Now attach the sliding handle base onto
the cage and tighten the screw with the
help of an allen key.
2