Table of Contents
Advertisement
6.
From the Create New Volume screen, move the cursor to the RAID Disk column of an
available disks then press <+>, <->, or <Space> to include the disks into an array.
By default, the RAID Disk field shows No before volume creation. This field is grayed out
under the following conditions:
•
The disk does not meet the minimum requirements for use in a RAID volume.
•
The disk is not large enough to mirror existing data on the primary drive.
•
The disk is already part of another volume.
7.
If a selected disk contains no files or data, the utility adds the disk to the array.
ASUS Z10PC-D8 Series
5-41
Advertisement
Table of Contents
