Table of Contents
Advertisement
SINGLE TEMPERATURE STRAIGHT VALVES
TFT1010, TFT1010ADJ
1.
Flush the new pipe prior to installation
2.
Install the strainer.
3.
Screw the valve body to the flange
4.
Measure and mark the two holes using
the fixing flange for drilling into the wall.
5.
Ensure the arrow on the valve body is
facing the dicrection of the outlet.
*Regular service must be carried out on the product to avoid product failure.
www.gentecaustralia.com.au
6.
Connect the water inlet and outlet.
7.
Push into the button the colour indicator
for hot or cold water.
Note
The difference between the TFT1010
and the TFT 1010ADJ is the cartridge.
The TFT 1010 ADJ has an adjustable
cartridge. For the time ajustment
instructions see pag. 17
TFT1010ADJ
15
Advertisement
Table of Contents
