Table of Contents
Advertisement
Installation Instructions
FOOT OPERATED VALVES
TFT3600, TFT3700
Foot Valve Installation
Choose the position that suits better (floor or
wall mounted)
Convert the pedal valve from floor
mounted to wall mounted:
1.
Remove the screw on the pedal lever.
2.
Reverse the pedal lever as shown in
Figure 1.
3.
Mount the unit securely ( floor or wall) to
prevent any movement while operating
the valve
Important note
We recommend to have the Foot Pedal
mounted at no higher than 70mm high
from the floor. (Figure 2)
Ensure the inlet strainer (figure 3) is
fitted securely.
*Use 350Kpa pressure reduction valve for extended life and better operation
14
Figure 1
4.
Use the 4 mounting screws to screw the
pedal valve into place.
How to adjust timing:
For time delay adjustment see page 17
Figure 2
Figure 3
Advertisement
Table of Contents
