Page 1
MODEL:YF6012-LE Electric 12" (30.5 cm) Snow Shovel OPERATOR’S MANUAL Our Customer Service staff is ready to provide assistance. In the case of a damaged or missing part, most replacement parts ship directly from Merotec USA in Atlanta or from one of our service partners in the US.
TABLE OF CONTENTS Technical Specifications........................Parts List..........................Intended Use..........................Safety Information........................... Operation........................Assembly............................... Maintenance............................Warranty............................SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions. Read all instructions and follow them with use of this product.
TECHNICAL SPECIFICATIONS Appliance cord Upper tube Rated voltage 120 V 60 Hz Lower tube Power 10 A Motor housing No load speed Up to 2500 RPM 1 W LED light Paddle size 6 in (15.24 cm) 2-blade paddle Clearing width 12 in (30.5 cm) Scraper blade Clearing depth...
Page 4
Warning Symbols on the product WARNING! Turn the machine OFF and disconnect it from the power supply READ THE OPERATOR'S MANUAL(S) before inspecting, cleaning, changing – Read, understand and follow all accessories or conducting any other instructions in the user manual(s) before maintenance task.
Page 5
time of production. from the extension cord during operation, Read and understand the contents of this secure the extension cord to the product manual before you start the motor. as shown on page 9 in Figs. 5 & 6. WARNING! To prevent electric shock, use This is the safety alert symbol.
Do not attempt to clear snow from a gravel or 10. Do not overload the machine capacity by crushed rock surface. This product is intended attempting to clear snow at too fast a rate. for use only on paved surfaces. 11.
Page 7
circuit(s) or outlet(s) to be used for this the plug does not fit fully into the wall electric snow shovel. Receptacles are outlet, reverse the plug. If the plug still available having built-in GFCI protection does not fit, contact a qualified electrician and may be used for this measure of to install the proper wall outlet.
ASSEMBLY Fig.3 CAUTION! Read complete INSTRUCTION MANUAL before operating this machine. Unpacking Carton contents • Electric snow shovel X1 • Joint-fixing knob and bolt X1 NOTE: the tip on the lower clip shall be • Adjustable handle and knob X1 inserted to the solt on the upper tube.
Page 9
Securing the Extension Cord Fig.7 1. Make a loop with the extension cord (Fig. 5) Safety lock button Fig.5 Trigger switch Operating Tips • Start the electric snow shovel and tilt it forward until the scraper blade at the base of the unit contacts the ground.
Page 10
damaged. (Fig. 11). LED light Fig.11 Fig.8 Tensioner Big pulley plate WARNING! Disconnect the extension cord before 4. Remove the old paddle from the housing performing any maintenance task. (Fig. 12). If the extension cord is plugged into the snow Fig.
Page 11
Fig. 17 NOTE: The housing will flex to allow for installation of the new paddle. Small pulley plate Belt 7. Place the tensioner back into position. Tensioner Rotate the paddles to ensure that the belt and paddles move freely, then reinstall Big pulley plate the cover by securing it with the seven (7) screws (Figs.
Yard Force. 3. If service or a warranty evaluation is requested, Yard Force will provide an RGA number that should be used in all communications with Yard Force and is required to be indicated on the product itself and on the outside of the box.
Page 13
1-866-902-9690 support@merotecusa.com Need Help? Please do not return the product to the place of purchase yet. We’re here to help and take care of all your needs. Contact our Customer Care Center in Atlanta, GA for help with: Product assembly or use Missing or damaged parts Troubleshooting You can also visit our website to download...