Philips EasyKey 7100 User Manual page 14

Register a fingerprint
Press [#], enter master PIN code and
press [#] to confirm.
3
2
Press [2] to enter user settings, then press [3]
to enter fingerprint registration. The system
will automatically number the fingerprint and
broadcast the number.
Place your finger against the sensor. After
hearing a voice prompt of "Take away
your finger and enroll again", please take
away your finger and re-place it against
the sensor. After hearing a voice prompt
of "Succeeded", press [*] several times
until you exit master mode.
Register a card
Press [#], enter master PIN code and
press [#] to confirm.
4
2
Press [2] to enter user adding, then press
[4] to enter card registration. The system
will automatically number the card and
broadcast the number.
Hold the card close to the card reader
until you hear a beep. After hearing
a voice prompt of "Succeeded", press
[*] several times until you exit master
mode.
12
User Information
Deletion
Delete a user PIN code
Press [#], enter master PIN code and
press [#] to confirm.
3 1 1
Press [3] to enter user deletion, then
press [1] to enter user PIN code deletion.
Press [1] again to delete a single user PIN
code.
Enter the 2-digit [user code] (00-09) of
the user PIN code that is to be deleted
and press [#] to confirm. After hearing a
voice prompt of "Succeeded", press [*]
several times until you exit master mode.
Delete all user PIN codes
Press [#], enter master PIN code and
press [#] to confirm.
3 1 2
Press [3] to enter user deletion, then press [1] to
enter user PIN code deletion. Press [2] to delete
all user PIN codes. After hearing a voice prompt
of "Succeeded", press [*] several times until you
exit master mode.