Canon ImageCLASS MF8180c Basic Manual page 148

Q
A
Q
A
A
Q
A
A
Transparencies do not feed correctly.
Q
A
Q
A
9
Paper feeds curled.
Q
A
9-30 Paper Feeding Problems
Have you fanned the paper stack before loading it in the cassette or
multi-purpose tray?
Be sure to fan the paper stack before loading it in the cassette or multi-purpose
tray. This keeps the sheets of paper from sticking together.
Does the cassette or multi-purpose tray contain an appropriate quantity of
sheets?
Make sure the paper stack in the cassette or multi-purpose tray does not
exceed the capacity of the cassette or multi-purpose tray. (See "Loading Paper,"
on p. 2-4.)
Do not force the paper stack into the cassette or multi-purpose tray.
Is only one type of paper loaded in the cassette or multi-purpose tray?
Load only one type of paper.
Make sure you load paper that meets the paper requirements for the machine.
(See Chapter 2, "Paper Handling.")
Are the transparencies loaded correctly?
Make sure the transparencies in the multi-purpose tray is loaded properly, and
that the paper guides are adjusted correctly. (See "Loading Paper," on p. 2-4.)
Is the proper transparency loaded in the multi-purpose tray?
Do not use any transparencies designed for color copiers. They will cause a
paper jam. Please use transparencies recommended by Canon.
Is the proper paper loaded?
Check if the proper paper is loaded in the cassette or multi-purpose tray. (See
Chapter 2, "Paper Handling.")