How To Use - Panasonic EW1613 Operating Instructions Manual

How to use

Prepare Place the main unit on a flat and
stable surface.
1
Plug in the power plug.
• The cord can be pulled out
from either the right or
the left.
2
Fill the water tank with
water.
a Open the water tank cap.
b Remove the water tank,
and fill it with water.
• When filling water, be sure
not to exceed the upper
water level limit.
c Set the tank to the main
unit firmly.
d Attach the water tank cap.
3
Install the nozzle.
• Choose a nozzle for your
purpose. (See page 10.)
8
EW1613亚洲向v6.indb 8
4
Upper water level limit
5
❹
❶
❷
❸
click
Press in firmly
until a "click"
is heard.
Press the power switch "
a Ensure the Stop/Jet switch
is set to " " (stop mode).
b Press the power switch
" " to turn on the power.
• The water pressure level
LED indicator lights on.
• The power will be cut off
after about 10 minutes to
avoid forgetting to turn off.
(The function for avoiding
forgetting to turn off.)
Press the water pressure
regulator switch to select
the water pressure level.
a With the nozzle facing the
basin, set the Stop/Jet
switch to " " (jet mode)
to jet water.
b Press "+" or "-" on the
water pressure regulator
switch until the desired
flow intensity is reached.
• Keep pressing "+" or "-" will
continuously change the
water pressure.
" .
a b
press
press
Stop/Jet switch
weak strong
(Level 1) (Level 10)
2020/7/30 上午11:18