After Use - Panasonic EW1613 Operating Instructions Manual

After use

Please clean the appliance after each use.
• The main unit cannot be washed with water.
1
To prevent the water from
splashing about, stop the
water jet while keeping the
nozzle in your mouth.
a Stop the water jet by setting
the Stop/Jet switch to
" " (stop mode).
b Press the power switch
" " to turn off the power.
• The water pressure level
LED indicator keeps
flashing for 30 seconds and
then goes off.
2
Throw away the remaining
water.
a Remove the water tank, and
throw away the remaining
water.
• While removing the water
tank, press the main unit by
hand.
• Change the water every
time when you use the
appliance.
b Wash the water tank.
EW1613亚洲向v6.indb 11
3
a
b
押す
press
4
5
Remove the remaining
water from the main unit.
a Install the water tank, and turn
on the power switch " " .
b With the nozzle facing the
basin, set the Stop/Jet switch
to " " (jet mode) to remove
the remaining water from the
main unit.
c When there is no water
coming out, set the Stop/Jet
switch to " " (stop mode),
and turn off the power switch
" " .
Disconnect the power plug
from the household outlet.
Clean the handle.
Pull out the nozzle
while pressing the
button.
Nozzle release
button
a
Stop/Jet switch
b
11
2020/7/30 上午11:18