Flush Channel Installation Guide
Connecting Node Flush Channel Face to Mounting
The Node Channel Face pushes onto the mounting brackets until you hear a click.
Connecting Node Flush Channels
Node Flush Channels can be connected together by way of plastic alignment clip. Alignment clips should be used to
ensure a high quality joint between adjacent channel faces.
Connect all required sections ensuring no visible gap between both sections.
Finished installation should be as shown below.
Flush Channel with Weave Panel
Flush Channel with Weave Panel
v001 | Flush Channel Installation Guide
9.84
250
OVERALL WIDTH
.23
6
RECOMMENDED CLEARANCE
W/ SURROUNDED CEILING
4.72
120
EXPOSED WIDTH
BRIDGE BRACKET
CHANNEL FACE
Figure 4
ALIGNMENT CLIP
(INSTALLED BY OTHERS)
FLUSH CHANNEL FACE
Figure 5
3.57
91
CHANNEL HEIGHT
.40
10
Flush Channel with Soft Cell Panel
Figure 6
11.81
300
OVERALL WIDTH
.12
4.72
3
120
RECOMMENDED CLEARANCE
FACE WIDTH
W/ SURROUNDING CEILING
Flush Channel with Soft Cell
4.16
106
CHANNEL HEIGHT
5