Push Buttons; Operating The Equipment; Cable Length Measurement - Value WT26 Series Manual

p B
Ush Uttons
Button Mode
Power off
MODE
Any
Any
▲▼ Cable Length
Measurement
▲ Cable Tracing
PORT Cable Length
and Cable
Tracing
o
peRatIng the
a. c L
aBLe
Switch on the main body by pressing the
will be ready for measuring the cable length.
To check the network cable:
1) The main body will be ready for measuring network cable length
when it is switch on;
2) Check if
button until
3) Unplug all cables which is connected to the main body;
4) Plug the testing network cable to the LOOPBACK plug;
5) The cable length will be automatically display;
6) After measuring, switch off the main body by holding down
the
Switch on the meter
Switch off the meter
Switch between cable
length measurement, cable
tracing and cable testing
Switch to check different
pair of wires
Switch between digital and
analogue
Switch to select network
cable, phone line and BNC
cable
e
qUIpment
m
ength easURement
appears, go to point 3. Otherwise, press "PORT"
appears and go to point 3;
button for about 3 seconds.
Function
Page 4
Access
Press to switch on the
meter
Hold down about 3 seconds
to switch on and off
Press once to switch to
next functions
Press either button to
switch
Press to switch
Press to switch
button. The Main Body