Table of Contents
Advertisement
7
5
Separate the front cover, keypad and
phone and place the keypad into the new
cover.
>
Note:
If you want to clean the inside of
your cover, use a clean, soft, dry cloth.
You should carefully blow off any
remaining dust before replacing the
cover.
6
To replace the front cover, place the top of
the cover onto the phone and then press
the bottom of the cover and the phone
together (making sure the two tabs at the
bottom of the cover are aligned correctly
with the holes on the phone - the cover
should click into place).
7
Insert the battery into the phone, starting
with the top edge first. Align the tabs on
the edge of the battery with the tabs on the
back of the phone. Make sure the gold-
coloured contacts of the battery are
touching the contacts on the phone. Push
down into place.
8
Replace the battery cover as described
above.
Wrist/neck strap
You can attach a wrist strap or neck strap to
your Sendo P600 phone.
First remove the battery cover as described in
the Covers section above. Now insert the
strap loop into the aperture at the bottom of
the phone, as illustrated below (1). Push the
strap loop over the small plastic hook (2) to
secure the strap in place.
[[[
]]]
32
Advertisement
Table of Contents
